Struct gapi_grpc::google::cloud::orgpolicy::v1::policy::ListPolicy

pub struct ListPolicy {
    pub allowed_values: Vec<String>,
    pub denied_values: Vec<String>,
    pub all_values: i32,
    pub suggested_value: String,
    pub inherit_from_parent: bool,
}

Used in policy_type to specify how list_policy behaves at this resource.

ListPolicy can define specific values and subtrees of Cloud Resource Manager resource hierarchy (Organizations, Folders, Projects) that are allowed or denied by setting the allowed_values and denied_values fields. This is achieved by using the under: and optional is: prefixes. The under: prefix is used to denote resource subtree values. The is: prefix is used to denote specific values, and is required only if the value contains a “:”. Values prefixed with “is:” are treated the same as values with no prefix. Ancestry subtrees must be in one of the following formats: - “projects/”, e.g. “projects/tokyo-rain-123” - “folders/”, e.g. “folders/1234” - “organizations/”, e.g. “organizations/1234” The supports_under field of the associated Constraint defines whether ancestry prefixes can be used. You can set allowed_values and denied_values in the same Policy if all_values is ALL_VALUES_UNSPECIFIED. ALLOW or DENY are used to allow or deny all values. If all_values is set to either ALLOW or DENY, allowed_values and denied_values must be unset.

Fields

allowed_values: Vec<String>

List of values allowed at this resource. Can only be set if all_values is set to ALL_VALUES_UNSPECIFIED.

denied_values: Vec<String>

List of values denied at this resource. Can only be set if all_values is set to ALL_VALUES_UNSPECIFIED.

all_values: i32

The policy all_values state.

suggested_value: String

Optional. The Google Cloud Console will try to default to a configuration that matches the value specified in this Policy. If suggested_value is not set, it will inherit the value specified higher in the hierarchy, unless inherit_from_parent is false.

inherit_from_parent: bool

Determines the inheritance behavior for this Policy.

By default, a ListPolicy set at a resource supercedes any Policy set anywhere up the resource hierarchy. However, if inherit_from_parent is set to true, then the values from the effective Policy of the parent resource are inherited, meaning the values set in this Policy are added to the values inherited up the hierarchy.

Setting Policy hierarchies that inherit both allowed values and denied values isn’t recommended in most circumstances to keep the configuration simple and understandable. However, it is possible to set a Policy with allowed_values set that inherits a Policy with denied_values set. In this case, the values that are allowed must be in allowed_values and not present in denied_values.

For example, suppose you have a Constraint constraints/serviceuser.services, which has a constraint_type of list_constraint, and with constraint_default set to ALLOW. Suppose that at the Organization level, a Policy is applied that restricts the allowed API activations to {E1, E2}. Then, if a Policy is applied to a project below the Organization that has inherit_from_parent set to false and field all_values set to DENY, then an attempt to activate any API will be denied.

The following examples demonstrate different possible layerings for projects/bar parented by organizations/foo:

Example 1 (no inherited values): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values:“E2”} projects/bar has inherit_from_parent false and values: {allowed_values: “E3” allowed_values: “E4”} The accepted values at organizations/foo are E1, E2. The accepted values at projects/bar are E3, and E4.

Example 2 (inherited values): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values:“E2”} projects/bar has a Policy with values: {value: “E3” value: “E4” inherit_from_parent: true} The accepted values at organizations/foo are E1, E2. The accepted values at projects/bar are E1, E2, E3, and E4.

Example 3 (inheriting both allowed and denied values): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values: “E2”} projects/bar has a Policy with: {denied_values: “E1”} The accepted values at organizations/foo are E1, E2. The value accepted at projects/bar is E2.

Example 4 (RestoreDefault): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values:“E2”} projects/bar has a Policy with values: {RestoreDefault: {}} The accepted values at organizations/foo are E1, E2. The accepted values at projects/bar are either all or none depending on the value of constraint_default (if ALLOW, all; if DENY, none).

Example 5 (no policy inherits parent policy): organizations/foo has no Policy set. projects/bar has no Policy set. The accepted values at both levels are either all or none depending on the value of constraint_default (if ALLOW, all; if DENY, none).

Example 6 (ListConstraint allowing all): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values: “E2”} projects/bar has a Policy with: {all: ALLOW} The accepted values at organizations/foo are E1, E2. Any value is accepted at projects/bar`.

Example 7 (ListConstraint allowing none): organizations/foo has a Policy with values: {allowed_values: “E1” allowed_values: “E2”} projects/bar has a Policy with: {all: DENY} The accepted values at organizations/foo are E1, E2. No value is accepted at projects/bar`.

Example 10 (allowed and denied subtrees of Resource Manager hierarchy): Given the following resource hierarchy O1->{F1, F2}; F1->{P1}; F2->{P2, P3}, organizations/foo has a Policy with values: {allowed_values: “under:organizations/O1”} projects/bar has a Policy with: {allowed_values: “under:projects/P3”} {denied_values: “under:folders/F2”} The accepted values at organizations/foo are organizations/O1, folders/F1, folders/F2, projects/P1, projects/P2, projects/P3. The accepted values at projects/bar are organizations/O1, folders/F1, projects/P1.

Implementations

impl ListPolicy

pub fn all_values(&self) -> AllValues

Returns the enum value of all_values, or the default if the field is set to an invalid enum value.

pub fn set_all_values(&mut self, value: AllValues)

Sets all_values to the provided enum value.

Trait Implementations

impl Clone for ListPolicy

fn clone(&self) -> ListPolicy

Returns a copy of the value.

pub fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ListPolicy

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ListPolicy

fn default() -> ListPolicy

Returns the “default value” for a type.

impl Message for ListPolicy

fn encode_raw<B>(&self, buf: &mut B) where
    B: BufMut, 

fn merge_field<B>(
    &mut self,
    tag: u32,
    wire_type: WireType,
    buf: &mut B,
    ctx: DecodeContext
) -> Result<(), DecodeError> where
    B: Buf, 

fn encoded_len(&self) -> usize

Returns the encoded length of the message without a length delimiter.

fn clear(&mut self)

Clears the message, resetting all fields to their default.

pub fn encode<B>(&self, buf: &mut B) -> Result<(), EncodeError> where
    B: BufMut, 

Encodes the message to a buffer.

pub fn encode_length_delimited<B>(&self, buf: &mut B) -> Result<(), EncodeError> where
    B: BufMut, 

Encodes the message with a length-delimiter to a buffer.

pub fn decode<B>(buf: B) -> Result<Self, DecodeError> where
    Self: Default,
    B: Buf, 

Decodes an instance of the message from a buffer.

pub fn decode_length_delimited<B>(buf: B) -> Result<Self, DecodeError> where
    Self: Default,
    B: Buf, 

Decodes a length-delimited instance of the message from the buffer.

pub fn merge<B>(&mut self, buf: B) -> Result<(), DecodeError> where
    B: Buf, 

Decodes an instance of the message from a buffer, and merges it into self.

pub fn merge_length_delimited<B>(&mut self, buf: B) -> Result<(), DecodeError> where
    B: Buf, 

Decodes a length-delimited instance of the message from buffer, and merges it into self.

impl PartialEq<ListPolicy> for ListPolicy

fn eq(&self, other: &ListPolicy) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &ListPolicy) -> bool

This method tests for !=.

impl StructuralPartialEq for ListPolicy